When you are ready, press the red Record icon in Serato DJ Pro, and start your mix.Test that your record levels aren't clipping (you can use the Gain knob to adjust this level).Set the record source in Serato DJ Pro to "Channel 3".'booth' or 'record' or '2nd master') into the AUX input of your SL 3. Connect the RCA cable from an additional output from your DJ mixer (i.e.Setup your DJ equipment like you would normally and launch Serato DJ Pro.1 x RCA cables (plus any other cables you need for your normal DJ setup).NOTE: Make sure to set the AUX channels dip switch on the hardware to line level when recording. Set up Serato DJ Pro normally with your DJ setup and laptop. With the SL 3 you can use the AUX input to record your set using Serato DJ Pro. NOTE: Because of the extra strain on your laptop's RAM and CPU while running Serato DJ Pro and a recording program together, we recommend that you use a desktop or a separate laptop to record a mix if you are able to. Check the record settings/preferences are set to stereo 44.1 kHz and 16bits (more if you desire).Set the record source in your recording program to "line".booth, record, 2nd master) into the line input of your computer (or your external soundcard) Connect the Stereo RCA to 3.5mm mini jack cable from an additional output from your DJ mixer (i.e.Setup your SL 2 like you would normally and launch Serato DJ Pro.1 x Stereo RCA to 3.5mm mini jack cable.1 x computer with line input (unless you have an external soundcard you wish to use).There are several recording programs you can use such as Audacity (free) or Ableton Live (paid, for more advanced options). When you are finished, make sure you stop the recording, and save the mix to a location of your choice.īecause the SL 2 only has Left and Right inputs, you will need to use another audio program to record as the audio is mixed and blended outside of the software (inside your DJ mixer).When you are ready, press record in your recording software, and start your mix.Test there is audio coming into the recording program and check the levels aren't going above zero dB on the recording channel.Set the record source in your Serato DJ Pro to "Mix".Serato DJ Pro has the ability to record the Mix or channels (hardware dependant) of your Serato DJ Pro controller.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |